International shipping Secure payment
Free shipping on orders over R1250 - courier delivery and within South Africa
The Mosquito Silicone Boot gives your Mosquito hotend them new treads, replacing the silicone sock with a high temperature insulator for your heater block.
The BIQU Hermit Crab Tool Changer saves you time and hassle with 3 interchangeable tool plates to quickly replace a clogged hotend or swap to a laser engraver.
This 0.5mm MK8 Stainless Steel Nozzle is compatible with 1.75mm filament printers and offers a good balance between printing speed and accuracy.
Wear-resistant 0.8mm Plated Brass Nozzle from the world-renowned brand Micro Swiss - Designed for 1.75mm E3D V5/V6 Hotend Assemblies.
The E3D V5 All-Metal Hotend Assembly for 3mm Filament, compatible with Charlstruder and Titan extruder assemblies up to 300°C for exotic filaments.
The Copperhead Heat Sink is one part of three components that comprise the Copperhead DIY Hotend, featuring a Groove Mount for Direct Drive Extruders.
These 1m lengths of 1.75mm Bowden Teflon PTFE Tube have an ID of 2mm and an OD of 4mm, and are used for guiding 1.75mm filament on Bowden-style 3D printers.
0.3mm E3D Nozzle for either the 1.75mm E3D V5 Hotend Assembly or the 1.75mm E3D V6 Hotend Assembly, for printing in moderate to high resolution.
This 0.2mm MK8 Nozzle is compatible with 1.75mm filament printers and is designed for high precision 3D printing – Ideal for ultra-fine detail prints.
This 0.2mm MK7 Nozzle is compatible with 3mm filament printers and is designed for ultra-high precision 3D printing, for small, extreme-detail prints.
E3D V5 cooling tower for the E3D V5 hot end assembly for 3mm filament.
This 0.4mm MK8 Stainless Steel Nozzle is compatible with 1.75mm filament printers and offers a good balance between printing speed and accuracy.
This quality-machined 0.6mm MK8 Hardened Steel Nozzle is made for printing highly abrasive materials on the CR-10, CR-20 & Ender Series of 3D Printers.
The Stainless Steel MK8 extruder drive gear is compatible with both 1.75mm and 3mm filament, providing 35% more power due to its small hobbed drive diameter.
These 1m lengths of Teflon PTFE Tube has an Inner Diameter of 3mm and Outer Diameter of 4mm – Ideal as sleeving within heat breaks in 3D Printing.
These Silicone Sock Insulators are made to keep E3D V6 Heater Blocks warm and snug, to prevent heat loss and improve part cooling capabilities.
E3D heater block for an E3D V6 hot end for 1.75mm or 3mm versions.
This specialised E3D V6 1.75mm Heat Break is made from Titanium for excellent thermal insulation, resulting in fewer clogs and better print quality!
These 1mm E3D VMA Brass Nozzles are for 1.75mm Filament 3D printers, and are capable of melting filament at rapid rates due to the extended length.
These 0.8mm E3D VMA Brass Nozzles are for 1.75mm Filament 3D printers, and are capable of melting filament at rapid rates due to the extended length.
The 0.4mm MK10 Nozzle is designed for the Wanhao i3, Duplicator 6 and Duplicator 9, made for 1.75mm ABS and PLA filament extrusion.
This 0.35mm E3D Stainless Steel Nozzle is a durable, food-safe nozzle for 1.75mm filament with high corrosive, abrasive and thermal resistances.
This quality-machined 0.4mm MK8 Hardened Steel Nozzle is made for printing highly abrasive materials on the CR-10, CR-20 & Ender Series of 3D Printers.
This 0.8mm E3D Hardened Steel Nozzle offers extreme durability for printing highly-abrasive exotic filaments like glow in the dark, carbon fibre and more.
A fantastic multi-pack of 6 quality 3D Printing Nozzles in varying sizes, designed to the same spec' as E3D originals - but a lot more affordable.
E3D V6 heat break used in the E3D V6 hot end for 1.75mm filaments.
This E3D V6 Bowden Cooling Tower is built for Bowden-style extruders and hotends – Universally caters to both 3mm and 1.75mm filament.
This 26 Tooth Extruder Drive Gear is a small part that grips the filament and pushes it through to the hotend, for smooth and consistent filament extrusion.
This 0.4mm MK10 Nozzle is designed for the Wanhao Duplicator 6, made to be compatible with 3mm filament.
This finely machined Hotend for D9 and i3 Mark 2 is a Wanhao Original Spare, designed to fit their top of the line desktop 3D printers.
This is a 40 tooth extruder drive gear that is commonly used on the kossel delta 3D printers.
The E3D V6 All-Metal Hotend Assembly is a tried and trusted hotend for 3D printing with a Direct Drive 1.75mm Extruder Assembly.
These 1m lengths of Teflon PTFE Tube has an Inner Diameter of 2mm and Outer Diameter of 3mm – Ideal as sleeving within heat breaks in 3D Printing.
Replacement Plastic Bowden Connectors for the Micro Swiss CR-10 Hotend Kit to ensure your print quality by securely clipping the Bowden Tube into place.
The PC4 M6 Bowden Connector is designed to fit M6 extruder assemblies using 1.75mm filament.
0.4mm E3D Nozzle for either the 1.75mm E3D V5 Hotend Assembly or the 1.75mm E3D V6 Hotend Assembly, for printing in moderate to high resolution.