UNO PLUS | Arduino Compatible Expand

UNO PLUS - Arduino Compatible

Waveshare Waveshare

ARUNOPLUS

New

UNO PLUS is a development board compatible with the Arduino UNO R3, an improved & enhanced alternative solution for Arduino UNO R3.

The Arduino Uno R3 is an excellent basic board that utilizes the ATmega16U2 microcontroller for basic to intermediate projects.

More details

13 Items

R249.95

tax incl.

Spend R1,000.00 more and get Free Shipping!

Free shipping over R1000 only for standard courier and within South Africa

UNO PLUS is a development board compatible with the Arduino UNO R3, an improved & enhanced alternative solution for Arduino UNO R3.

UNO PLUS Vs UNO R3:

 UNO PLUSUNO R3Remarks
Operating Voltage 5V/3.3V 5V Dual voltage level to support more shields
Reset Lateral Vertical Lateral button is easier to use when connecting with shield
Bootloader Switch Yes None The board can be configured to run program immediately when power-up by the switch
USB Connector Micro USB USB Type B Micro connector is more commonly used, and shields won't be blocked anymore while connecting
DC Jack Low profile Normal height Shields won't be blocked anymore while connecting
Power Output Header Yes None

Providing 5V/3.3V power output OR common-grounding with other boards

3.3V Power Output 800mA Max 150mA Max UNO PLUS features higher driving capability
Oscillator Crystal oscillator Ceramic resonator Crystal oscillator is suit for applications where accurate clock reference is required
ADC Channel 8 6 CFG used as ADC6 by configuration, and ADC7 from the Reserved PIN
Connecting with Prototype Breadboard Supported Not supported Solder pads is provided for DIY interfaces to connecting with prototype breadboard
USB Driver Compatible with all main systems Doesn't compatible with WIN7/WIN8 Express Edition Driver will never failed to install thanks to the onboard FT232
Firmware Fixing Supported Not supported Firmware can be fixed by using the onboard FT232, no extra programmer is needed

What's on the UNO PLUS:

  1. ATMEGA328P-AU
  2. AMS1117-3.3 : 3.3V voltage regulator
  3. NCP1117ST50T3G : 5V voltage regulator
  4. FT232RL : USB to UART convertor
  5. Arduino interface
    • compatible with standard Arduino interface with two additional analog inputs A6 (config the CFG), A7
    • solder pads provided, supports prototype breadboard
  6. ICSP interface
  7. MICRO USB connector : for uploading program OR serial port debugging
  8. Power output header : 3.3V OR 5V, voltage level configured by the onboard power configuration switch, used as power output OR common-grounding with other boards
  9. FT232 pins : for burning Bootloader into the microcontroller
  10. DC input : 7V ~ 12V
  11. Reset button
  12. Power indicator
  13. Serial port Rx/Tx indicator
  14. User LED
  15. Power configuration switch : for configuring the operating voltage
  16. Bootloader selection switch
    • turn ON : the board will reset when power-up OR other USB devices were detected connecting to the PC
    • turn OFF : the onboard program runs immediately when power-up, and the board will not reset when other USB devices were detected connecting to the PC

UNO PLUS Photos:

UNO-PLUS
Arduino UNO PLUS
UNO-PLUS
Arduino UNO PLUS back view
UNO-PLUS
Arduino UNO PLUS back view
UNO-PLUS
Arduino UNO PLUS connecting with Motor Control Shield
UNO-PLUS
Arduino UNO PLUS connecting with IO Expansion Shield
UNO-PLUS
Arduino UNO PLUS connecting with WiFi module and sensors
UNO-PLUS
Arduino UNO PLUS connecting with XBee module and sensors
UNO-PLUS
Arduino UNO PLUS connecting with GPS/GSM Shield

UNO PLUS Expansion Headers:

UNO PLUS Dimension:

Downloads:

Development resources: demo codes, schematic, datasheets, etc.
www.waveshare.com/wiki/UNO_PLUS

Included: 

  • 1x UNO PLUS Board
  • 1x USB A to USB Micro B Cable
Compatible with Arduino UNO R3, Onboard MCU ATMEGA328P-AU

This product is developed, manufactured, and tech supported by Waveshare.

 

No customer reviews for the moment.

Write a review

When it comes to producing unique electronics components and modules, there are very few brands that can provide the quality that Waveshare can. Based in the Futian District in Shenzhen, China, Waveshare are experts in developing electronics to a high standard of quality, which have been thoroughly tested to work seamlessly with corresponding development platforms and systems – such as the E-Ink HATs for Raspberry Pi’s.


What we love most about Waveshare is how they are dedicated to providing quality products, and have moved away from the typical “Made in China” stigma – cheap products with cheap parts and components. Instead, Waveshare understand the value of supplying quality products and building sustainable relationships with international resellers and distributors. They know that consistent quality will result in consistent business, and as such they always ensure strict quality control for each and every product that comes out of the manufacturing plant.


We are always excited to peruse through their vast catalogue of exciting new products to find unique modules, components or even entire development boards that are designed with quality in mind. Because we know that every cent that we spend with Waveshare will be well-spent, with each product that order adding real value to our own catalogue of products.