0.2mm MK7 nozzle for a wide range of 1.75mm hot end assemblies.
19 Item Items
Warning: Last items in stock!
This is a 0.2mm replacement nozzle for the Makerbot MK7 Stepstruder for 1.75mm filament.
Although the MK7 nozzles where originally developed for the Makerbot MK7 Stepstruder they can be used on a variety of hot end assemblies such as the E3D V5 hot end assembly for 1.75mm filament or the E3D V6 hot end assembly for 1.75mm filament as well as being used in many other printers such as Geetech and Wanhao.
The top of the nozzle is threaded in order to fit into the MK7 heater block.
It is good to keep in mind that brass nozzles are vulnerable to abrasive erosion by more exotic filaments like carbon-fibre filled materials, metal powder filled materials and glow in the dark filaments and also may be damaged by nasty head crashes.
When swapping out your nozzles from other hot end components, we recommend resorting to the hot tightening technique. Follow this procedure - being careful not to burn yourself.
The reason for this is that the aluminium heater blocks used have a higher coefficient of thermal expansion than the brass and steel used in the nozzles and heat breaks. This results in a small gap being created between the nozzle and the break inside the block when the hot end is at temperature, but this only happens if the nozzle has been tightened while cold.
*Note this is not supplied by Makerbot themselves it is manufactured to the same specs and quality controlled locally to ensure it functions exactly as expected while saving you money.
No customer reviews for the moment.
The Arduino Pro Mini 5V/16MHz ATmega328P is A...
A rigid steel bracket which allows one to...
Microphone Sensor Module with adjustable gain....
This ESP8266 IC based ESP-07 variant is a WiFi...
This Anycubic Buildtak offers a 200mm diameter...
The LCD 16x2 White on Blue Display gives...
Tiny 0.96" 128×64 pixel Yellow Blue OLED...